Aks Customized Low Temperature Thermoplastic Immobilization Sheet for Radiation Therapy

Aks Customized Low Temperature Thermoplastic Immobilization Sheet for Radiation Therapy

Quality: directly produced by the manufacturer, can accept quality testing, and can also customize any size. Transport: We can accept sea freight, air freight, and express delivery, with a guarantee time of 1-2 weeks and a customs clearance rate of over 99%. Even if the goods are detained, you can resend the freight and I will resend the goods.

Category:

Themoplastic splint

Keywords:

Inquiry

Product Description

Application Field:
Orthopedics Rehabilitation hospital Burn department Aesthetic and Reconstructive Plastic Surgery ENT department First Aid & Emergency

How to use it?
Adjust the water bath to 75ºC, put the sheet into hot water for 2-3 minutes. After the sheet turns soft and pliable, put it on a soft cloth and dry it on. Mold it is according to the body part, hoop, and loop straps behold the splint in place, padding/liner material increase patient comfort. Keep the sheet for 10 minutes, it can be plastic well. With a perfect memory, it can be remold more than 8 times.

Attention:
1. Adjust the water temperature to 65ºC-75 ºC, don't be more than 80 ºC, if more than 80 ºC, it will make the splint contraction and deformation.

2. Be sure not to place the sheet in hot water for too long a time. In general, 2-3 minutes should be enough to make it soften and activate.

3. Working surroundings. When the operation room temperature is more than 20ºC, it can be plastic within 1.5-3 minutes; When the room temperature drops to 10ºC, the plastic time is about 30-50 minutes.

4. For orthopedic splints, after activation, it can be stretched to 1.5 times as its original size. Excessive pulling could affect its reshaped resilience and damage its memory function.

5. How to restore a molding splint back to its factory settings? Just put it into the hot water with 65ºC-75 ºC, and then it will rebound automatically after 5 minutes.

6. Due to the characteristics of the material itself, in the activation process, it will occasionally occur small area of sticky. Please be sure not to pull randomly. When it leaves the water to solidify, it will automatically relieve adhesion.

7. Storage in room temperature is enough. 8. The product is Eco-friendly, put it outside in the yard with a natural climate for about 12 months, it will be degraded by itself.